Product & Service

Gang Programmer MODEL 1950

Standard 4Gbit Memory. Acoomplishing 7 times faster programming speed by newly developed MPG engine.

As the density of flash memories is becoming larger, fast programmer is required to shorten the programming time. MODEL1950 is equipped with newly developed MPG engine accomplishing ultra fast erase, program, verify of flash memories according to the specification of each memory.

Special Features

Speed
Programming

Model 1950 accomplished 1.5 to 7 time’s faster programming speed comparing to the previous model. Programming speed can be even shorten by applying multi PAE mode that was also installed in Model 1940.

Multi PAE (Multi Programming Address Enabled): Programmer looks ahead FF data to be skipped for programming (Blank Check, Verify are applicable for all address).

Verify (Data Comparison)

Fastest Programming as a gang programmer is accomplished by newly developed MPG engine.

Verify Time Privious model Model 1950  
64Mbit(NOR) 19 sec110 1 sec265 Approx. 15 times.
512Mbit(NAND) 1min.57sec.260 12 sec406 Approx. 10 times.
Large Memory

Memory size is 4Gbit(512Mbyte) standard and can be upgraded to 256Gbit(32Gbyte). Large memory size is suitable for programming mobile phone programming and high density IC.

LCD

Progresss bar indicates the progress of programming.

Targeted device

Model 1950 supports Flash memory such as NOR, NAND and flash embeded microcontroller.

Data Transfer

Fast data transfer can be accomplished by USB2.0. RS232C is equipped as standard. Direct transfer from Compact Flash Card (CF card) to buffer memory is available. Buffer data in the programmer can be uploaded to CF card.

Option

Originally designed various sockets are available according to the package type of IC.

Socket unit of MODEL1950 is prepared separately. Minimum one socket unit (two programming sites) and maximum eight socket units can be sent on a programmer.

Socket adaptors are consumable items of which life span vary by the environments and the operations during the production. It must be cleaned or replaced when the failure rate is increased due to unstable contacts.

Various socket units can be prepared according to the package.

Please contact to Minato or Minato distributor for the availability of the socket.

Specification

Programming Target Low voltage device from 3.3v to 1.4v such as NOR, NAND flash ROM and flash embedded microcontroller.
*For programming, a socket unit is required. Please contact to Minato or Minato distributor for detail.
Memory size Standard 4Gbit (512Mbyte)
Max. 256Gbit (32Gbyte) as an option
The number of simultaneous programming Max. number of simultaneous programming : 16
Operating Mode COPY: Copy data from flash ROM to the buffer memory of the programmer
BLANK: Blank check of flash ROM
VERIFY: Verify data in flash ROM and the buffer memory of the programmer
ERASE: Erase data in flash ROM
PROGRAM: Program and verify data
CONT: Continuous operation of BLANK+PROGRAM+VERIFY
*If BLANK is failed, ERASE mode is added.
Data Input RS232C, USB2.0, Copy from master ROM, Copy from compact flash card
Interface RS232C, USB2.0, Compact Flash Card
Display 40 x 4 (characters) LCD
Power Supply From AC100 to AC240V (automatic change) , From 50 to 60Hz
Measurement 378(W)x150(H)x402(D)mm
Weight 9kg(Without socket unit)
Power Consumption 100VA(Max.)
Recommended Temperature From 5 to 35℃