Product & Service

Device Programmer Model 1895/2

Model for design and development MODEL1895 Based 2 Site Gang Programmer.

Model 1895/2 is a 2 site gang programmer with standard 256Mbits memory and max. 1Gbit memory. With optional programmer control software offers control of programmer from PC which is suitable for R & D and samll production.

Special Features

Targeted deive

Model 1895/2 is targeting various programable device such as flash memory (NOR, NAND, S-AND), EPROM, flash embeded one-chip microcontroller.

Socket Unit System

By utilizing the combination of socket units and various adaptors, Model 1895/2 supports various device package.

Data Transfer

Model 1895/2 is equippedwith USB interface. With optional remote control software (XPROM), fast data transfer can be accomplished through USB interface.

Others

The operation is simple and easy.

Socket unit

SU08-42D Two DIP 42pin sockets
8 bits JEDEC assign
Targeted device: EPROM, EEPROM, flash memory,One-chip Micro Controllers
SU16-42D Two DIP 42pin sockets
16 bits JEDEC assign
Targeted device: 16 bits EPROM, OTP
SU16-48D Two DIP 48pin sockets
16 bits EIAJ assign
Targeted device: 16 bits flash memory
SU16-48TS Two TSOP 48pin sockets
16 bits EIAJ TSOP
Targeted device: 16 bits flash memory

Socket unit is required. Adapters for CSP, BGA, SOP, TSOP, PLCC and other packages are available. For more information, please download device list from our web site at www.minato.co.jp

Specification

Targeted device EPROM, EEPROM, flash memory,One-chip Micro Controllers
Memory capacity 128M bytes (1G bits)
Maximum gang programming 2 pieces
Operation modes COPY: Copy the data from the number one PROM to the buffer of the programmer
BLANK: Blank check of the PROM
PROGRAM: Write data into the PROM
VERIFY: Compare the data between the buffer memory and the device.
CONT: Sequential operation of BLANK, PROGRAM and VERIFY
ERASE: Erase the data in the flash PROM
SET PROGRAM: 1, 2, 4, 8-programming mode
Input data Through RS232C/USB and copy of a master ROM data
Interface RS232C, USB
Display 20 x 4 characters LCD
Power 100〜240V、50〜66Hz
Dimensions 380(W)x107(H)x297(D)mm
Weight 5.2kg
Power consumption 30VA (maximum)
Operating temperature 5〜35°C