PH-M880 is 8 socket x 8 site and a total of 64 socket write-in full automatic programming system which carry eight gang programmer MODEL408PH (eight-piece writing). By the unification design of MODEL408PH and PH-M880, an operation panel to all the operations are possible.
- High speed Gang programmer 48sets of “MODEL408PH”(8sockets ×8sites total 64pcs) auto programming system.
- PH-M880 with MODEL408PH is operated by panel operation easily.
- Main target device is high density devices. (NAND・eMMC, higher programming time 240 seconds)
- Adjusting JIG is not needed to change socket adapter.
- 8sets of programmers with auto handler make it possible to high throughput for programming. Multiple programmers create high production capacity not depending on programming time.
|Buffer memory||Standard 256Gbit|
|Target devices||eMMC・eSD・GB-NAND・MoviNAND・i-NAND・NAND・OneNAND・Flash Micro controller・NOR・etc|
|Log file||.txt format for each lot/td>|
X,Y,Z,θ axes use highly accurate steeper motors and timing belt drives.
X,Y resolution: 4μm/pulse
Z resolution: 30μm/pulse
θ resolution: 0.18°/pulse
|UPH||1000[UPH] UPH=Unit per Hour|
X-Y,θis set by original pad and Jig using
Original image processing
|Display inspection||Device position is corrected by CCD camera|
JEDEC tray (Size：315.8mm×135.8mm for auto loader *it is neccessary for Tray “Center Vacuum Pickup Site”)/EIAJ
Input 20 pieces, Output 20 pieces, Fail 1 piece, Vacant 3 pieces
Shachihata TAT Ink
Dot marking, Character marking
|Control OS||FA PC OS: Windows XP ServicePack3|
|User interface||Color LCD Panel, Key board, Touch panel|
|Time to exchange socket adapter||Lower 600 seconds|
|Air||0.4Mpa-0.5Mpa 50l/min ※Clean dry air only|
|Power Supply||ACIN :AC100V/ AC220V 50/60Hz 15A|
(D)1170x(W)1650x(H)1500(mm) About 530Kg
※LCD display is not included